You don't need to have a bunch of money or construction experience to refinish your hardwood flooring. The actual work is not very technical, but it is exhausting and time consuming. It is also fairly inconvenient because it involves a lot of sanding which kicks up a lot of sawdust that you need to protect your home from. If you want to refinish your hardwood floors, you might be struggling between doing it yourself or hiring professionals. This article explains the process and should be helpful to customers trying to decide which route is best for them.
Lots of Moving and Physical Work
First off, you need to think about practicality and logistics of the job. Of course, you need to get everything off of the floor before you can refinish it. It is much easier if your move everything out of a room entirely. You should also do your best to cover any window fixtures or decorations hanging from the wall. The fact of the matter is, sawdust can get all over—it can even get stuck on your walls and ceilings. If you don't cover these things beforehand, you could spend hours trying to clean them later.
You also want to cover up any carpet adjoining the hardwood that you are refinishing. Protecting the baseboards, or the bottom few inches of your walls is also very important. You want to completely cover the lowest 4 to 6 inches so the edge of the sander does not scrape off the paint or gouge the wood.
Sanding is Simple but Backbreaking Work
The sanding process is fairly straightforward, but it can also be time-consuming. You basically need to get down on your knees and sand the wood until the finish is completely off. This is definitely a process that is easier if you have two or three people helping. With a few sanders, you can get through a couple of rooms in a single day.
Applying the Stain Might Be the Easiest Part
Applying the new stain is probably the least demanding part of the whole job. You can use a painters pole and rollers to apply the stain so you don't have to bend down too much. This work won't be too tiring, but most floors will need two or three coats of stain for a complete finish.
Consider these three steps and the physical requirements of the project before deciding to take on the project. If you're unable to handle the work, it is definitely smarter to leave it to the pros.
For more information, you will want to contact a company such as Everlasting Homes.